The Sanura Flatmate is a plug & play shower waste water heat recovery tray designed for easy installation in level-access showers.
Suitable for both new-build and renovation projects, it can be installed directly on the bathroom floor and connected to an exposed shower mixer.
With no moving parts or electronics, the Flatmate+ provides a reliable, low-maintenance solution to reduce domestic hot water energy demand.
Size & Specifications
Length
745 mm
Width
745 mm
Height
80 mm
Weight
14 kg
Advice max temperture
65°C
Max capacity potable water
15 l/min
Max capacity waste water
25 l/min
Material & Certification
Max Pressure potable water side
7 bar
Outer shell
ABS
Heat exchanger
Double walled red copper
KIWA Certified
Yes
BCGR Certified
Yes
Warranty
5 years
Product number
411027
This horizontal waste water heat recovery system is made with a durabel ABS outer shell and a copper inner tube. This smart and innovative design delivers an efficiency of 42,6% at 5,8 L/Min and can be fitted directly to the existing tap without any adjustments.
Size & Specifications
Length
745 mm
Width
745 mm
Height
80 mm
Weight
14 kg
Max Pressure potable water side
7 bar
Material & Certification
Advice max temperture
65°C
Max capacity potable water
15 l/min
Max capacity waste water
25 l/min
Materials outer shell
ABS
Material heat exchanger
Double walled red copper
KIWA Certified
Yes
BCGR Certified
Yes
Warranty
5 years
Product number
411027
During every shower, valuable heat is lost through the drain.
The Sanura Flatmate+ captures this heat from the outgoing shower water and transfers it to the incoming cold domestic water supply.
This reduces the energy required to produce hot water while maintaining the same level of shower comfort.
Our technical and sales team is available to answer any questions you may have and provide advice on products and installations
Both products are horizontal Shower Waste Water Heat Recovery systems, but they serve different installation needs.
| Sanura Flatmate+ | Sanura X-Tray | |
|---|---|---|
| Installation | Freestanding plug & play | Integrated into bathroom floor |
| Application | Renovation & simple installations | New-build & planned installations |
| Installation position | On top of finished floor | Built into floor construction |
| Connection | Direct connection to exposed shower mixer | Integrated plumbing connection |
The Flatmate is suitable for level-access showers with a drain and an exposed shower mixer connection. It is not designed for installation inside an existing shower tray.
Installation is straightforward for a qualified plumber or installer familiar with shower and water connections.
The heat exchanger has no moving parts and requires very little maintenance. Normal cleaning of the shower surface and drain should be carried out as part of standard bathroom maintenance.
Apart from regular cleaning, the Flatmate requires no extra maintenance.
No. The system operates passively without electricity, controls or moving parts.
The Flatmate+ is designed primarily for direct connection to the shower mixer, preheating the cold water supply before it reaches the shower.
No. The system only recovers heat from shower wastewater. The wastewater itself continues through the normal drainage system.
Contact our team or find a distributor near you.
Interested? Leave your details and we’ll send you more information for your project.
Fields marked with an * are mandatory.
