This vertical wastewater heat recovery system is constructed with a PVC-U outer tube and a double-walled copper inner tube.
This innovative design delivers an efficiency of 65,2% at 9,2 L/Min
Size & Specifications
Length
2100 mm
Diameter
65,6 mm
Min. installation height
2200 mm
Weight
9,0 KG
Max. temperature
40°C
Max. portable water capacity
30 l/min
Max. waste water capacity
30 l/min
Max. pressure (water side)
10 bar (PN10)
Material & Certification
Outer shell
PVC-U
Heat exchanger
Copper
KIWA Certified
Yes
Passivhaus Certified
Yes
BCGR Certified
Yes
Warranty
10 years
Product number
708134
This vertical waste water heat recovery system is made with a PVC outer shell and a copper inner tube. This pattented design delivers an efficiency of 65,2% at 9,2 L/Min making it the most efficient product available.
Size & Specifications
Length
2100 mm
Diameter
65,6 mm
Min. installation height
2400 mm
Weight
9,0 KG
Max. temperature
40°C
Max. portable water capacity
30 l/min
Max. waste water capacity
30 l/min
Max. pressure (water side)
10 bar (PN10)
Material & Certification
Outer shell
PVC
Heat exchanger
Double walled red copper
KIWA Certified
Yes
Passivhaus Certified
Yes
BCGR Certified
Yes
Warranty
10 years
Product number
708134
When you shower, valuable energy disappears down the drain. A Recoup waste water heat recovery system captures that heat from the used water and transfers it to the incoming cold domestic water. This reduces the hotwater demand and reduces the load on the water heater, saving both energy and costs.
Discover Recoup add-ons: practical accessoiries that simplify installation and guarantee optimal system performance.
Our technical and sales team is available to answer any questions you may have and provide advice on products and installations
The main difference is that the HF version is designed for higher flows. It has two domestic cold water inlets and one heated water outlet. This increases the capacity of the system considerably compared to the VX 2100.
Yes, the VX 2100 HF can be installed in almost any building type. Provided there is sufficient room (2,20m) underneath the bathroom.
We strongly advice to ask a qualified installer to install this product. Proper installation ensures maximum efficiency and maintains the 10 years warranty.
Just as any other drainage system, clogging as a result of hair, soap and other particles, is a risk. We therefore recommend using a hair filter. From normal opertation, a showertube WWHR does not have an increased risk of clogging.
No periodic maintenance is needed for the VX 2100 HF due to it’s design and self-cleaning capabilities. Once installed the VX 2100 HF can operate many years without service or maintenance.
With a Recoup showerpipe, any type, the hot water buffer size can be reduced by up to 40%. An instantaneous water heater or any other type will experience a considerable lower load and will use less energy and increase its service life.
There are no restrictions on water heater types, the function of the showerpipe WWHR will remain unchanged and equally beneficial for reducing energy consumption.
The system requires no auxiliary power.
All Recoup WWHR systems comply with all relevant European standards regarding health and safety.
Yes, the VX 2100 HF can be connected in three ways:
A. Connection to water heater and shower mixer (maximum efficiency)
B. Connection to the shower mixer only
C. Connection to the water heater only
Contact our team or find a distributor near you.
Interested? Leave your details and we’ll send you more information for your project.
Fields marked with an * are mandatory.
